Discharge Devices

Previous Top Next

Prior to discharge a device in your Habeetat Planner software, it is imperative that you connect the end points, or artifacts that you want to link.
For all Solidmation products facilities, we recommend downloading the manual installer from here

Once installed, the device shall proceed to discharge in the software, go to the Devices tab in the top menu:

· Select New Device option. This opens a dropdown menu.

· Select New Device ZigBee option ... A window opens with a wizard that will tell you that Habeetat Planner is performing the search on the wireless network to find new devices

New ZigBee Device

Important: For Habeetat Planner can incorporate the new device you are installing to your network, you should verify that the Activity green LED is flashing, otherwise you must press the Join button.

On the Devices screen you can visualize devices or drivers discharged and the corresponding Endpoints.

Once you have released a driver on the Habeetat Planner, you must configure devices.

Each of the devices being added to the system must be configured for proper operation. This can be done at the time of discharge the Device or at any other time.

See Also:

Device edit