Installation Procedure

· A HPA-6200 Control Unit plus a computer to display the Habeetat Planner or any computer with Windows NT/200/XP/Vista, where Habeetat Planner installs plus a USB interface, HPA-2400.

· A broadband Internet connection in place to complete the installation. This allows you to control Habeetat line devices from anywhere in the pre-configured software.

Procedure:
Here are the minimum and steps to perform an automation application.

1- Download the Habeetat Planner Full version software from Solidmation website or by clicking here.
2- Install Habeetat Planner Software on the PC to be used for configuring the installation to be performed.
3- Install the "Control Unit": HPA-6200, or else the "USB Interface": HPA-2400, for which you will also need to download the Device drivers from Solidmation website or by clicking here.

4- Install the Habeetat equipments that require the installation: lighting controllers, curtains, on / off, pulse counters, IR transceivers, etc... For proper installation of the devices should read carefully the user manual of each, the same can be downloaded by clicking here.

5- Run the Habeetat Planner software and discharge installed devices.
6- Configuring Endpoints for each device.
7- Diagram the plans / screens of installation. At this point you can use the default template that is installed with the software or make a new design changing the display variables and customizing the layout of each flat / screen.

8-Integrate the Endpoints: drag each Endpoint to the corresponding plan / screen.
9 -Set up scenes, Macros and Scripts that needs for the install.
10-Incorporate the necessary buttons to shoot the scenes and macros, you must configure each button to perform the action you want.

11 - If your facility has receptor-emitting infra red codes you will teach it the commands you want to manage from Habeetat Planner. For this you need have the appropriate control of the device you want to tuck domotic. The learned codes can be accessible to the plans in the same way that the scenes or macros, you must add and configure a button for each IR code you want to control from the Habeetat Planner interface.
12 - Finally, you should check the correct operation of the interface has been designed from the "Preview" of the software or from any browser. You should verify that the commands executed from the plans / screens are actually performing

Note: Habeetat Planner has a multimodal interface, allowing users to perform the same operation in different ways. This document details a sequence of logical steps that allow a novice operator ordering, however, you can perform the same actions in another order without any problem.

Important: We recommend checking the navigation of all plans or screens. We suggest checking the navigation of the plans to add to the installation from the Preview of the application or from any browser.