Habeetat Planner - Recent Posts

Topic "Problem with scene and script" a message from ecamarda

Tue, 10 Apr 2012 10:39:09 GMT

Hola Diego, quisiera saber desde donde puedo configurar para que u na cortina, luz, escena, etc. se active automaticamente a una determinada hora y dia. Se que esto se puede hacer pero no encuentro desde donde. Desde ya agradezco tu respuesta.

Topic "Mover una instalación de Habeetat Planner" a message from ddemarco

Fri, 30 Mar 2012 11:36:24 GMT

Para quienes precisen mover una instalación de Habeetat Planner de una PC a otra, aquí explico los pasos:
1) Desinstalar Habeetat Planner en la pc "vieja". La configuración no se borrará, sino que quedará en la carpeta Solidmation, dentro de Archivos de Programa.
2) En la PC nueva, asegurarse de que Habeetat Planner NO ESTÉ instalado. Si está, es necesario desinstalarlo antes de continuar.
3) Copiar la carpeta "Solidmation" de la PC vieja a la PC nueva, en la misma ubicación (dentro de "Archivos de Programa").
4) Instalar Habeetat Planner en la PC nueva.
5) Registrar la instalación de la manera habitual. Luego de la registración, verán que los planos y el resto de la configuración serán los de la PC vieja.

Nota importante: si se utiliza una PC con Windows de 64 bits, la carpeta Solidmation estará dentro de la carpeta "Archivos de programa (x86)", en lugar de la habitual "Archivos de Programa".

Topic "Moving Habeetat Planner to another PC" a message from ddemarco

Fri, 30 Mar 2012 11:31:57 GMT

If you need to move Habeetat Planner to another PC, the steps are as follows:
1) Uninstall Habeetat Planner on the old PC. Your configuration will not be deleted. It will remain in the Solidmation folder, under Program Files.
2) On the new PC, make sure Habeetat Planner IS NOT installed. If it is, uninstall it.
3) Copy the "Solidmation" folder from the old PC to the new PC, in the same location (inside "Program Files").
4) Install Habeetat Planner on the new PC.
5) Register the new installation as usual. After registration, you'll find that all your plans and configuration from your old PC will be there.

Important note: if you are using a 64-bit version of Windows, the Solidmation folder will be inside the "Program Files (x86)" folder, instead of the usual "Program Files".

Topic "Acceder a una NetCam" a message from ecamarda

Tue, 27 Mar 2012 09:31:42 GMT

Muchas gracias por la respuesta, seria bueno que actualicen el manual.

Topic "Acceder a una NetCam" a message from ddemarco

Tue, 27 Mar 2012 08:17:10 GMT

Hola Esteban. En la versión 4.2, el manejo de cámaras se hace directamente desde la solapa de dispositivos. Para agregar cámaras o DVRs, elegí directamente la opción "Nuevo dispositivo IP".

Saludos,
Diego

Topic "Acceder a una NetCam" a message from ecamarda

Tue, 27 Mar 2012 03:15:54 GMT

Hola, acabo de instalar la nueva versión y cuando voy a Herramientas preferencias, no me aparece la solapa de Video. Me puedes indicar porque sucede esto? Muchas Gracias

Esteban

Topic "Install 3160 mh" a message from ddemarco

Thu, 29 Dec 2011 13:00:54 GMT

It's difficult to say. Usually you need to put the controller in setup mode (pressing the button for a few seconds) and then send any command (up or down) from Habeetat Planner. Also check the logs to see if the interface is working properly.

Cheers,

Topic "Supported Interfaces" a message from ddemarco

Thu, 29 Dec 2011 12:59:19 GMT

Hi Alex,
We're currently selling our HPA-2400 interface, which is Zigbee-compatible, and goes together with our products. We currently do not offer support for devices other than ours, plus PLCBus, Sonos, and various cameras. We'll be launching our Zigbee product line very soon (January 9th).
Cheers, and happy New Year!
Diego

Topic "Supported Interfaces" a message from Alex

Thu, 29 Dec 2011 08:46:05 GMT

Hello,

i have allready running a PLC Interface.
I would like to install a wireless interface. But the solidmation interface is not certified for Europe at this moment.
So what kind of wireless interfaces are Supported by Habbeetat?

At the Preferences Menue i can just see PLC and Habeetat / Habeetat ZB.

Thanks & Regards

Topic "Install 3160 mh" a message from inmar

Fri, 23 Dec 2011 02:56:44 GMT

Hey
I am tring to install the curtain plcbus controller 3160mh.
But when I definding the endpoint as curtain I can't send the address.
Any time I try to put the device on setup mode and sends close or open ,nothing happens.

What I am doing wrong?

Thank you

Topic "Problem with scene and script" a message from ddemarco

Wed, 21 Dec 2011 05:06:54 GMT

First make sure that your script is working correctly. From the script editor, you can run ths script step by step. Check to see if an error gets reported. The most likely cause is that you are referring to the endpoint as "Bathroom". Make sure that the endpoint has exactly this text "Bathroom" in the field "ID for scripts" in the endpoint properties.

Topic "Zone Player" a message from ddemarco

Wed, 21 Dec 2011 05:04:54 GMT

That's correct, this type of step allows you to instruct a Sonos Player to tune a particular radio station. You can see more about what Sonos players can do (really great stuff) at their website: www.sonos.com

Topic "Zone Player" a message from Alex

Fri, 09 Dec 2011 13:11:29 GMT

Ok i´m sorry for that stupid question.
I think it is possible to stream webradio to a "Sonos" Zone Player. So it is only possible to stream to that device.

Topic "Zone Player" a message from Alex

Fri, 09 Dec 2011 01:09:47 GMT

Hello,

i have a Problem with Habeetat Planner. When i try to insert a Macro i.e. al Radiostation i can´t choose a Zone Player. Can someone tell me what a Zone Player is? Is it just a softwareplayer für the streams?

Thanks & Regards
Alex

Topic "Problem with scene and script" a message from inmar

Sun, 20 Nov 2011 00:40:37 GMT

Hey
First of all ,thank you of your amazing solution!
I have plcbus system ,with 1141+ interface and 2263 module.
I created the 2263 as a plcbus device endpoint "Bathroom".
I have defined successfuly the module with the address E1, and can control the endpoint in the "preview" tab.
The problem for me is when i try to use this endpoint in a scene or in a script - its just not responding to the commands.

In the script i writed :
function Main()
{
HP.Endpoints("Bathroom").Switch(true)
}

I definded a button that activate this script ,but when i pressed the button nothing happens.

What i am doing wrong ?

Thank you,

Inmar

Topic "Residencial vs. comercial" a message from frankn

Wed, 19 Oct 2011 18:00:49 GMT

indicar en el texto del menu de registro de install nuevo que las licencias para casas son free, y que las comerciales no lo son. Hoy solo dice que son free.

Topic "Residencial vs. comercial" a message from frankn

Wed, 19 Oct 2011 18:00:46 GMT

indicar en el texto del menu de registro de install nuevo que las licencias para casas son free, y que las comerciales no lo son. Hoy solo dice que son free.

Topic "Servidor web" a message from ddemarco

Fri, 19 Aug 2011 17:15:14 GMT

Hi,

Could you please remove the background and check? If you created the background as a separate image (inserting an image in the plan), it may be that this image appears "on top" of the other objects. The correct way to add a background is by right-clicking on the plan and use the option to set a background (NOT using the new image menu).

Could you please let me know which version of HomePlanner you're using?

Cheers,

Diego

Topic "Servidor web" a message from ruichaos

Fri, 19 Aug 2011 17:10:17 GMT

Hi!
First I would like to congratulate you for this program. It´s good and easy simple to use.
Yet, when I click on the link that appears on Design, the browser only shows the background. This appens on the IE and Firefox.

Yours Sincerely,

Rui

Topic "Render issue on non IE web browsers" a message from frankn

Tue, 16 Aug 2011 14:51:03 GMT

Please see attached files with an issue where the image is not rendered correctly (or at all) in the following browsers:

- Firefox
- Safari
- Chrome

It does show correctly on IE.

Topic "download link" a message from ddemarco

Sun, 07 Aug 2011 08:00:03 GMT

Thank you so much! I've just corrected the links, and tried them in Firefox to make sure.

Thanks again!

Diego De Marco

Topic "download link" a message from aviwolf

Sun, 07 Aug 2011 04:33:52 GMT

Hi,

I'm getting the following error in Firefox: "The system cannot find the file specified."
The link tries to open :
http://www.hometomation.com/homeplanner/Downloads%5CHomePlanner33_EN.exe
Instead of:
http://www.hometomation.com/homeplanner/Downloads/HomePlanner33_EN.exe

The last slash is the wrong one.

In IE the download link looks fine.
It could be something on my machine or on your side.
Just to let you know.
Thanks

Topic "Lanzar HP con Diseñador deshabilitado" a message from jcgs

Thu, 31 Mar 2011 09:11:43 GMT

Hola Diego : Realmente te felicito por este inmenso trabajo. Es "impecable". ¿tenés uno ó dos cerebros ?.
Mi inquietud es la siguiente : Estoy probando HP -(cero inconvenientes)-, pero ha sucedido que
durante su funcionamiento han pasado a modo diseñador (tocando donde no deben). Es posi-
ble lanzar el programa para que sólo quede en modo Vista Previa., tal como si estuviera ac-
cediendo y controlando en forma remota ???

Agradezco desde ya tu respuesta y nuevamente :TE FELICITO (si con eso alcanza)

Topic "Greetings from sunny Costa Rica." a message from RICHARD BLANK

Mon, 14 Mar 2011 14:01:20 GMT

After reading a few threads,I wanted to introduce myself to this community and look forward to sharing ideas with other forum members.

Best regards,

Richard

http://www.outsourcingtocostarica.com/page_builder.php?page=index.php&Lang=EN

.
edited by RICHARD BLANK on 3/14/2011

Topic "Servidor web" a message from ddemarco

Wed, 09 Mar 2011 11:15:29 GMT

Gracias por tus comentarios, ahora te envío un mail privado a la dirección que aparece en tu página.

Saludos,
Diego

Topic "Servidor web" a message from doneweb

Fri, 04 Mar 2011 08:35:12 GMT

gracias diego!
un genio!

soy de una empresa de argentina tambien.. si te parece me podes dar tu tel o mail y nos juntamos para hablar algunos temas..
nos parece muy interesante lo que hiciste..

te hago una consultita mas..
cuando opero las lamparas manualmente (con la llave) no se actualiza la data en pantalla..
funciona asi esto o tengo algo mal configurado..

gracias!

un abrazo

Topic "Some questions" a message from ddemarco

Thu, 03 Mar 2011 22:00:55 GMT

Hi Alex,

I'm currently in the process of adding most of the features you need. Running Internet Explorer in full screen from a shortcut is not possible, as far as I know. You can maximize it to full-scree pressing F11, but the next time you launch it you will need to do it again.

To add JavaScript, simply create an embedded HTML box (right-click on the plan background and you'll get the option) and then you can do whatever you want, as long as you know a little bit of HTML and JavaScript.

Please find below an example (paste it inside an embedded HTML box and view from a browser):

This will show the current date and time, using the browser's preferred format, updating it every second. You can google different ways to change the formatting to whatever you like, and also change the style of the DIV so that it uses a nicer font, etc.

Cheers,

Topic "Servidor web" a message from ddemarco

Thu, 03 Mar 2011 21:41:58 GMT

Hola!

Seguramente se trata del firewall de windows. Probá desactivándolo, y si ves que todo funciona, entonces volvelo a activar, pero agregá el puerto 80 a la lista de excepciones.

Saludos, y quedo a tu disposición para lo que precises.

Diego

Topic "Servidor web" a message from doneweb

Thu, 03 Mar 2011 14:17:43 GMT

Como estas diego,
Ante todo te felicito por el programa..
Te hago una consulta

no puedo hacer andar el servidor web..
intento ingresar desde otras pc de mi red local y me es imposible..

no se si lo estoy haciendo mal, lo que hago es ingersar en inernet explorer el ip de la maquina en la que esta corriendo el soft y su correspondiente puerto..

gracias por la ayuda!

saludos,

Topic "Some questions" a message from Alex0815

Fri, 18 Feb 2011 16:42:41 GMT

Hello,

my name is Alex and first i will tell you that this is a great tool, i love it.

But now i have some questions to that applikation.
Is it possible to Copy and Paste Buttons, Textes and perhaps complete Pages so it is much easier when i have a default layout i want to have i.a. for each room.

Is it possible to make the webpage on autofullscreen? So i have on each device or monitor fullscreen. That would be perfekt if you have tablet-pc´s with different resolution.

How can i change the Button-Layout? Possible to change Button-size by hand?

Can i change the Colour of the Weather-Picture "Wind-Direction"? I will take a dark background.

Can someone give me an exapmple of a skript like show the time. I now how to use a java script in html, so i can show a clock there, but how dows this work here?

Thanks a lot

Regards
Alex